• Μειωμένη τιμή

FREERIDE 600 HYBRID

1.650,00 €
1.155,00 € Έκπτωση 30%
με ΦΠΑ

This hydrofoil hybrid (aluminium-carbon) foil lifts off very early and easily carries the weight of the board and rig. Ideal to Kite foil in all sorts of conditions, the wide span brings high performances and maximum stability.

The Foil is made of:

  • - Mast Aluminium 85 cm
  • - Front Wing Carbon Windsurf 600 cm²
  • - Fuselage Alu 60 cm
  • - Stabilizer Carbon Freeride 300cm²
  • - Plate (for double US box)

Accessible and really progressive, the F-ONE FOIL is the new weapon of choice to not only ride, but truly fly over the water.

Ποσότητα
Σε Απόθεμα

Accessible, progressive, performing, light and maneuverable, the F-ONE kitefoil range has been created to provide the best dedicated weapon to all riders.

Foiling is more than a new discipline; it’s a whole new world. The F-ONE kitefoil range has been developed with the most experienced foil riders and every element of the foil has been designed to deliver the best imaginable experience out on the water whether you about to start or if you already master the magic of foiling.

With innovation deeply rooted into its DNA, the F-ONE team has worked tirelessly to design, engineer, test and optimize this new piece of equipment. The shapes and profiles have been carefully selected and optimized by F-ONE’s in-house naval architect, and the foil assembly concept was completely thought back towards ease of use.


 

MAST85.jpg

Length: 85 cm

The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle and windsurf. The profile is extruded with precision from 6063 aluminium block. The shape of its section benefits from our years of experience in kitefoiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular. The aluminium mast can be used on every foil of the range and it is very easy to jump from one length to another.

FREERIDE_FRONTW.jpg

Area: 600cm²
Aspect Ratio: 5.6
Weight: 0.78 Kg*

Designed with less area but a higher aspect ratio than the Freeride 800 Wing, this one offers greater performance potential and can be controlled with ease, showing some predictable and intuitive characteristic. Its 600 cm² offer enough grunt to lift you out of the water effortlessly and the wing remains easy and fluid to handle at pace thanks to its very sound profile. Built using PRE-PREG carbon over a FORGED CARBON central core, the stiffness of the blades has been finely tuned to make it as stable and predictable as possible. With great directional control provided by the arched span and enough area to rely on, the FREERIDE 600 wing can be pressed hard to reach higher speeds if this is what you 're after and will be a great all-rounder for freeride performance foiling.

FREERIDE_BACKW.jpg

Area: 300 cm²
Aspect Ratio: 5.8
Weight: 0.24 kg

Solid, versatile and progressive, the Freeride stabilizer can be combined with any of the freeride or carving front wings and fits a very large range of practices.

Equipped with generous winglets, the stabilizer blade offers fantastic control with enough surface area to provide full confidence in all situations.

Built in Carbon Composite and designed to be securely mounted on F-ONE fuselages, its profile and angle of incidence were tuned to achieve a very intuitive balance which will help you get your foiling maneuvers in more easily.

FUSELAGE60.jpg

Length: 60cm
Weight: 0.61 kg

The TITAN fuselage 60 is a fuselage that connectes to F-ONE aluminium or carbon masts via a TITAN connection. It is made of aluminium 6061, CNC machined with high precision and fully anodized. The TITAN fuselage 60 must be fasten to the mast or mast foot using three M6x25mm tapered head screws.
At the forward end, this fuselage can accept all wings of any size with FCD connectors. Once it is plugged in, the front wing must be fastened with 210mm main rod. A stabilizer can be fastened at the back using two M6x16mm tapered head screws . The craddle for the stabilizer was designed to keep the foil in trim when using F-ONE stabilizers.

TITAN_MAST_FOOT.jpg

TITAN MAST FOOT

The TITAN mast foot is the connecting part that makes the F-ONE aluminium masts compatible with all TITAN fuselages and wings. It is made of 6061 aluminium, CNC machined with high precision and fully anodized. To install the TITAN mast foot, it should be inserted into the bottom end of the aluminium mast and fastened with two M6x25mm tapered head screws.

TOP_PLATE.jpg

The F-ONE aluminium mast can be fitted with a number of options to connect with the board.

The Mast Top parts are machined out of solid blocks of 6061 aluminium. The accuracy of the CNC makes sure the geometry of the connection is perfect. Stainless steel inserts are used systematically to preserve the durability of the fastening connections. The 4-bolt Top Plate has become a market standard and is compatible with any board featuring a twin track system. The bolt spacing we use is 160×90 mm but our latest version also features an option for 165×90 mm.

FO.19.FOI.0600

Χαρακτηριστικά

Year
2019
Κατηγορία
Foil