• Reduced price

RACE 510 CARBON

€2,400.00
€1,896.00 Save 21%
Tax included

This full carbon foil gathers the best of design and technology to reach amazing racing performances

The Foil Carbon Race 510 is made of:

- Mast Full Carbon Race 95 cm
- Front Wing Carbon Race 510
cm²
- Fuselage SST Carbon Race 38 cm
- Stabilizer Carbon Race 210 cm²
- KF-Box

Accessible, progressive, performing, light and maneuverable, the F-ONE kitefoil range has been created to provide the best dedicated weapon to all riders.

Quantity

Foiling is more than a new discipline; its a whole new world. The F-ONE kitefoil range has been developed with the most experienced foil riders and every element of the foil has been designed to deliver the best imaginable experience out on the water whether you about to start or if you already master the magic of foiling.

With innovation deeply rooted into its DNA, the F-ONE team has worked tirelessly to design, engineer, test and optimize this new piece of equipment. The shapes and profiles have been carefully selected and optimized by F-ONEs in-house naval architect, and the foil assembly concept was completely thought back towards ease of use.


RACE_MAST.jpg

Length: 95 cm
Chord: Bottom= 11 cm / Top= 13.2 cm
Thickness: Bottom = 1.2 cm / Top=1.33 cm
Weight: 
1.50 kg (K-F BOX) 1.70 kg (DEEP K-F BOX)

Benefitting from the latest racing developments in terms of shape and construction, the F-ONE Carbon masts provide amazing speed potential with top precision in all conditions. With their high performance profile evolving from 1.2 cm thick at the bottom to 1.35 cm at the top, these masts deliver an impressive feeling of glide and top of the range performance.   The intricate profile and chord length prevent turbulence and make them very secure and stable at speed. Their elaborate carbon PRE-PREG one-shot molding construction makes sure these masts meet the required demand on torsion and bending stiffness to keep the control of the foil at any moment and especially when pushing hard. Equipped with the patented FAST CONNECTION DEVICE constructed from PRE-PREG carbon, these masts come with great modularity and ease of use as one single screw is all that’s needed to assemble the main parts together.

FREERIDE_FRONTW.jpg

Area: 510cm²
Aspect Ratio: 5.8
Weight: 0.18 Kg*

The racing wing of the range has been designed to offer the best performance on the race course.

Its profile and area have been tailored to provide enough power for the upwind legs without restraining the downwind speed. Its flat arch and twisted profiles make it very tolerant, even when operating close to the surface.

The race wing benefits from the same reliable construction in Pre-preg carbon molded over a Forged carbon core for maximum stiffness.

Developed by our best riders to turn the upwind mark first and sail lower and faster down the wind, this wing shows impressive efficiency to dominate the competition.

FREERIDE_BACKW.jpg

Area: 210cm²
Aspect Ratio: 5.8
Weight: 0.18 kg

The F-ONE race stabilizer is designed to offer a better glide and high performance for leisure or racing use. Recommended for more experienced riders, its S-shaped arch enables to include winglets that help with directional stability and control.

Built in Carbon Composite and designed to be securely mounted on F-ONE fuselages, its profile and angle of incidence were optimized for the best performance at any point of sail.

RACE_FUSELAGE.jpg

Length: 42cm
Weight: 0.47 kg

Built out of Pre-preg carbon fibers around a steel core, the F-ONE fuselages are designed to be extremely stiff and provide perfect control with a low drag sectional area.

With a full stainless steel tail, the assembly with the stabilizer is solid and very reliable. The tail matches the angle of incidence required onto the stabilizer to guarantee an intuitive balance whatever the wing combo selected.

The 42cm fuselage provides better directional and pitch stability which helps a lot at lower and medium flying speeds. Recommended with Freeride 800, 600 wings.

pre-preg.jpg

With Pre-preg fabrics, the carbon fiber is directly impregnated with epoxy resin by its manufacturer; this guarantees a perfect ratio between epoxy and carbon, and represents the highest quality process. The material is stored in cooled rooms and catalyzes at 120° C in a mold.

The Pre-preg fibers must travel in refrigerated trucks and be stored frozen. The refined ratio between carbon fiber and epoxy resin provides the lightest weight with the best mechanical properties of carbon fiber.

PRE-PREG, multi-axial carbon layers

PRE-PREG with FORGED CARBON core

DKF.jpg

F-ONE kitefoils are equipped with the fully conical KF-BOX. Its shape makes it easy to connect and fits well with the thickness of the kite boards due to its moderate height. The KF-BOX offers a perfect, tight support.


FO.00.FOL.0010