• Compatible with SUP boards and inflatable kayaks equipped with high-pressure valves.
• Quick and easy connection between your compressor and inflatable equipment.
• Effort-saving inflation by reducing the need for manual pumping.
• Compact and lightweight design, easy to carry and store.
• User-friendly solution for quicker setup before heading out on the water.

Recommended Use:

For safe operation and to protect your equipment, it is recommended to use a pressure gauge and follow the manufacturer’s pressure guidelines (up to approximately 15-20 PSI / 1.0-1.4 bar, depending on the product). Small low-power compressors may not provide sufficient performance for high-pressure inflatables.

• Made with comfortable quick dry soft fabric.
• Extra big hood big hood made of a plush.
• Front pocket
• Adjustable hood
• OSFA

Seams
Flatlock seam construction

Material
Quick Dry Polyamide

The large plush-lined hood adds extra comfort and protection against wind and chill, while the front pocket allows storage for essentials or a place to warm your hands. A must-have for any trip to the beach, this poncho makes changing simple, warm, and effortless.

Features

Made with comfortable soft fabric.
Extra big hood made of a plush.
Front pocket
Adjustable hood
OSFA

• Optimal length of 6′ (≈ 1.8 m) — long enough to follow your movements without hindrance, while limiting the risk of tangling.
• Ergonomic wrist attachment — comfortable inner lining, precise fit, and secure hold without slipping.
• High-tenacity resistant cord — robust and durable materials, resistant to abrasion, impact, and salt water.
• Reinforced connectors — strong carabiners/buckles for reliable attachment to your wing line.
• Understated gray design — discreet profile and clean finish suitable for regular use.

An essential accessory for keeping control of your wing when wing foiling or wing surfing, combining comfort, reliability, and safety.

> 7mm neoprene padding
> Internal adjustment system
> Double velcro adjustment for a secure fit
> Stepless adjustment for the perfect fit
> Single insert design for NSP compatibility
> Tremendously comfortable
> Bootsie- and wetsuit compatible
> Friction-resistant washers prevent rotation

Material:

This latest MFC Footstrap is made from robust PVC with rounded edges for extra comfort. The variable adjustment is made possible by double velcro straps, covered with neoprene fabric.

In our Elements and Protech range, we include these MFC-designed sets out of the box.

NSP longboards that have a 2+1 or 4+1 setup and come in Elements or Protech construction will come with a different US10 center fin, but the side bites are the same, making sure you can ride your NSP the day you unbox it.

There is nothing worse than a peeling deck pad, which is why NSP uses premium 3M adhesives, as it provides the best possible bond between your board and the thermoformed EVA. Different from conventional EVA, thermoforming gives these repurposed traction pads a more abrasion-resistant layer that will hold up longer. Make sure your board is properly cleaned up before applying the pads, and wait 24 hours before hitting the water to get the best possible bond for years to come. Removal is easiest with a hot air gun and some soapy water.

3-Piece pattern – Arch bar

The 3-piece tail pads are the most versatile patterns that offers variable width, high tail kick, comfortable diamond groove grip and a center arch bar. It’s the easiest to install, offers tons of grip and will work on any board.

Adding an additional front section of traction pads eliminates the use of wax altogether. The arch on your repurposed traction pads helps you find the center line of your board intuitively and increases grip – perfect for foiling applications.

There is nothing worse than a peeling deck pad, which is why NSP uses premium 3M adhesives, as it provides the best possible bond between your board and the thermoformed EVA. Different from conventional EVA, thermoforming gives these repurposed traction pads a more abrasion-resistant layer that will hold up longer. Make sure your board is properly cleaned up before applying the pads, and wait 24 hours before hitting the water to get the best possible bond for years to come. Removal is easiest with a hot air gun and some soapy water.

2-Piece pattern – Regular

The regular 2-piece tail pad is best suited for smaller boards, allowing you enough space for your leash insert and a single variable width to adapt to the shape of your tail. Having a high kick tail and comfortable diamond groove traction pattern on your repurposed traction pads allows you to push harder, meaning more speed and drive.

• High-quality urethane
• Cord diameter 7mm / 1/4″
• Double stainless steel swivels
• Double-layer neoprene strap
• Triple wrap rail saver
• Integrated key pocket

• High-quality nylon webbing belt
• Comfortable neoprene front liner
• Swivel mount to avoid tangling up
• Quick-release urethane clip
• One size fits all
• Compatible with all NSP leashes