These high aspect glider style wings are specifically designed for downwind foiling. The outline and foil profiles combine hydrodynamic efficiency, deliver higher speeds and excellent pump characteristics in downwind conditions. These foils are based on high-performance windsurf/kite race designs and have been adapted for the slower speeds of downwind SUP. Pair with our RW 245 downwind rear wing.

Key design characteristics:

– Early take-off and sustained flight
– Reduced profile for high-efficiency
– Excellent pumping characteristics for downwind racing

These high aspect glider style wings are specifically designed for downwind foiling. The outline and foil profiles combine hydrodynamic efficiency, deliver higher speeds and excellent pump characteristics in downwind conditions. These foils are based on high-performance windsurf/kite race designs and have been adapted for the slower speeds of downwind SUP. Pair with our RW 245 downwind rear wing.

Key design characteristics:

– Early take-off and sustained flight
– Reduced profile for high-efficiency
– Excellent pumping characteristics for downwind racing

This is our most popular wing for intermediate to advanced foilers. Perfect for high performance surf, SUP, wing foiling, freeride windsurf and kiteboarding.
It delivers next generation efficiency, speed, early lift-off and control. Windsurf riders say this wing delivers great natural stability that enables confident riding at all angles upwind and downwind. The speed and carving capabilities are unmatched.

Key design characteristics:

– Thinner profile for greater speeds
– Subtle dihedral helps stability
– Works in a wide range of conditions.

This is our most popular wing for intermediate to advanced foilers. Perfect for high performance surf, SUP, wing foiling, freeride windsurf and kiteboarding.
It delivers next generation efficiency, speed, early lift-off and control. Windsurf riders say this wing delivers great natural stability that enables confident riding at all angles upwind and downwind. The speed and carving capabilities are unmatched.

Key design characteristics:

– Thinner profile for greater speeds
– Subtle dihedral helps stability
– Works in a wide range of conditions.

MORE

Easy jibing and other maneuvers are another advantage of the Thrust WS setup. The delta front wing works in tandem with the vertical stabilizer of the back wing to deliver easy control when turning. The front wing provides lift at low speeds making it much easier to cruise through a jibe without coming off the foil. While high aspect foils require the board to plane first, the Thrust WS setup engages the foil, lifting you up even when the board has not reached full planing. The Thrust Windsurf foil setup offers the earliest foiling in the lightest winds, maximum control at any wind speed—in comparison to high aspect foils—and accessible maneuverability in jibes and tacks. Its unique design, not only welcomes new riders to the sport, it supports you through the journey as you advance your skill level.

WHATS NEW

. 50% Lighter Wings
. Back Wing
. Monocoque Ultra Robust Back Wing Construction
. Heavy-duty Fuselage
. Abracadabra Quick Plate Connection
. Stealth Stripes

CONSTRUCTION

. Aircraft Grade High Precision CNC Cut Fuselage
. Aircraft Grade Extruded Aluminum Mast with Custom Wet-sanded Speed Finish* = Improved performance + faster & smoother from every angle of attack
. Carbon/Glass PrePreg & Hi Mod Foam Core Front Wing Construction
. Carbon/Glass PrePreg & Hi Mod Foam Core Monocoque Back Wing Construction
. 316 Marine Grade Stainless Steel Hardware

INCLUDED ITEMS

• Front Wing WS 1
• Back Wing WS 2
• 70 cm Aluminum Mast
• Fuselage WS
• Foil Assembly Screw Set
• Abracadabra Board Mount Plate
• Abracadabra Board Mount Plate Screw Set
• Foil Cover

Who is it for?

Hover Crossovers are for riders who desire one board that can foil windsurf, SUP surf and SUP foil.

What’s it do?

These boards offer unmatched versatility and performance across three sports.

Why is it unique?

The Hover Crossover stands alone as a board that combines three sports in one board without compromising performance.

What’s new?

New Shapes in S-Glass Sandwich construction.

KEY FEATURES

Quad Fin Setup = (2) FCS 4.75 Front Fins + (2) FCS 4.0 Quad fin setup included – best suited fin setup for use as a traditional SUP board
Ledge Handle = Ergonomic + easy to pick up & carry effortlessly
Grooved & Embossed EVA Pad = Lightweight + ultimate grip + minimized water absorption due to embossed technology
FCS II System = Allows use of any FCS II toolless fins
High density PVC Foil Track System with (2) 10” US Boxes = Easy, fine-tuned foil placement compatible with plate designs as well as with Naish Abracadabra system
Mast Track = Mount the windsurfing universal to use as a Windsurf foil board
Foostrap Inserts = Ride it as a Windsurf foil board with or without footstraps (4 straps are included)
Automatic Pressure Valve Design = Automatic pressure equalization of the core

CONSTRUCTION

FEATURES

(2)FCS 4.5 Front Fins + (2)FCS 3.5 Back Fins

High density PVC foil track system with (2) 10” US Boxes Easy, fine-tuned foil placement compatible with plate designs as well as with Naish Abracadabra system

WINDSURF WING 1150 DESCRIPTION

For 2020, Naish introduces an all new wing that builds on our design philosophy of creating wings that get freeride and freerace windsurf foilers up and riding in the lightest possible conditions with relatively small sails. The new wing features a higher aspect ratio, refined delta planform, and a unique ‘thin’ foil section that delivers early takeoff, longer easier glides, and improved top speed. Rather than being exclusively focused for upwind/downwind work, this wing also performs exceptionally well on reaches, making it the optimum set up for the traditional sailing at most locations in the world. The 2020 windsurf wing is designed to work with the 2020 Stabilizer 320.

Abracadabra Quick Plate Connection

COMPLETE KIT INCLUDES

• Abracadabra Plate
• 75 cm mast
• Windsurf Fuselage
• Windsurf Front Wing
• Windsurf Stabilizer 450 Backwing
• Titanium Foil Assembly Screw Set (3 x 30 mm M6 Titanium Torx screws – 3 x 30 mm M6 Stainless Steel Torx screws – 5 x 20 mm M6 Titanium Torx screws)
• Abracadabra Mounting Screw Set (4 x 30 mm M6 Stainless steel Torx screws and 4 x stainless steel T-nuts)
• Foil Wing Covers and Carry Case
• Torx T30 Driver

Foiling is more than a new discipline; it’s a whole new world. The F-ONE kitefoil range has been developed with the most experienced foil riders and every element of the foil has been designed to deliver the best imaginable experience out on the water whether you about to start or if you already master the magic of foiling.

With innovation deeply rooted into its DNA, the F-ONE team has worked tirelessly to design, engineer, test and optimize this new piece of equipment. The shapes and profiles have been carefully selected and optimized by F-ONE’s in-house naval architect, and the foil assembly concept was completely thought back towards ease of use.

Length: 95 cm Chord: Bottom= 11 cm / Top= 13.2 cm Thickness: Bottom = 1.2 cm / Top=1.33 cm Weight: 1.50 kg (K-F BOX) 1.70 kg (DEEP K-F BOX) Benefitting from the latest racing developments in terms of shape and construction, the F-ONE Carbon masts provide amazing speed potential with top precision in all conditions. With their high performance profile evolving from 1.2 cm thick at the bottom to 1.35 cm at the top, these masts deliver an impressive feeling of glide and top of the range performance.   The intricate profile and chord length prevent turbulence and make them very secure and stable at speed. Their elaborate carbon PRE-PREG one-shot molding construction makes sure these masts meet the required demand on torsion and bending stiffness to keep the control of the foil at any moment and especially when pushing hard. Equipped with the patented FAST CONNECTION DEVICE constructed from PRE-PREG carbon, these masts come with great modularity and ease of use as one single screw is all that’s needed to assemble the main parts together.

Area: 900cm² Aspect Ratio: 7.1 Weight: 0.97 Kg* Designed for downwind performance Windfoil, this wing is made to lift out of the water as soon as possible and glide at speed for exhilarating performances. Clearly the WINDSURF 900 wing is all about efficiency with its high lift section for an early lift off combined with large span and high aspect ratio for minimum drag. Inspired by the latest developments of the kitefoiling circuit, this wing is a true weapon. The WINDSURF 900 is built using the high technology PRE-PREG carbon process over a PU injected core. The FORGED CARBON central core remains at the heart of the assembly for maximum strength, stiffness and durability.

Area: 300 cm² Aspect Ratio: 5.8 Weight: 0.24 kg Solid, versatile and progressive, the Freeride stabilizer can be combined with any of the freeride or carving front wings and fits a very large range of practices. Equipped with generous winglets, the stabilizer blade offers fantastic control with enough surface area to provide full confidence in all situations. Built in Carbon Composite and designed to be securely mounted on F-ONE fuselages, its profile and angle of incidence were tuned to achieve a very intuitive balance which will help you get your foiling maneuvers in more easily.

Length: 42cm Weight: 0.47 kg Built out of Pre-preg carbon fibers around a steel core, the F-ONE fuselages are designed to be extremely stiff and provide perfect control with a low drag sectional area. With a full stainless steel tail, the assembly with the stabilizer is solid and very reliable. The tail matches the angle of incidence required onto the stabilizer to guarantee an intuitive balance whatever the wing combo selected. The 42cm fuselage provides better directional and pitch stability which helps a lot at lower and medium flying speeds. Recommended with Freeride 800, 600 wings.

With Pre-preg fabrics, the carbon fiber is directly impregnated with epoxy resin by its manufacturer; this guarantees a perfect ratio between epoxy and carbon, and represents the highest quality process. The material is stored in cooled rooms and catalyzes at 120° C in a mold. The Pre-preg fibers must travel in refrigerated trucks and be stored frozen. The refined ratio between carbon fiber and epoxy resin provides the lightest weight with the best mechanical properties of carbon fiber. 1 PRE-PREG, multi-axial carbon layers 2 PRE-PREG with FORGED CARBON core

F-ONE windfoils are equipped with the fully conical Deep KF-BOX. Its shape makes it easy to connect and fits well with the thickness of the boards due to its moderate height. The Deep KF-BOX offers a perfect, tight support

Freeride 600

Titan fuselage 60 Kite
The TITAN fuselage 60 is a fuselage that connectes to F-ONE aluminium or carbon masts via a TITAN connection.

It is made of aluminium 6061, CNC machined with high precision and fully anodized. The TITAN fuselage 60 must be fasten to the mast or mast foot using three M6x25mm tapered head screws.
At the forward end, this fuselage can accept all wings of any size with FCD connectors. Once it is plugged in, the front wing must be fastened with 210mm main rod. A stabilizer can be fastened at the back using two M6x16mm tapered head screws . The craddle for the stabilizer was designed to keep the foil in trim when using F-ONE stabilizers.

Length: 60cm
Weight: 0.61 kg

TITAN MAST FOOT
The TITAN mast foot is the connecting part that makes the F-ONE aluminium masts compatible with all TITAN fuselages and wings.

It is made of 6061 aluminium, CNC machined with high precision and fully anodized. To install the TITAN mast foot, it should be inserted into the bottom end of the aluminium mast and fastened with two M6x25mm tapered head screws.

Alu mast 85 cm
The F-ONE aluminium mast can be used for all disciplines, kite, surf, sup and windsurf.

The profile is extruded with precision from 6063 aluminium block. The shape of its section benefits from our years of experience in kitefoiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular. The aluminium mast can be used on every foil of the range and it is very easy to jump from one length to another. A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).

Stab C300
Versatile and progressive, the C300 stabilizer can be combined with any front wings and fits a very large range of practices.

Equipped with generous winglets, the stabilizer blade offers fantastic control with enough surface area to provide full confidence in all situations.
Built in Carbon Composite and designed to be securely mounted on F-ONE fuselages, its profile and angle of incidence were tuned to achieve a very intuitive balance which will help you get your foiling maneuvers in more easily.

ESCAPE 510 INCLUDED EQUIPMENT
EVA COVER

Technology

FCD

We have patented the FCD assembly concept because this is a critical aspect of the kitefoil. It drives the reliability and ease of use for assembling and taking the foil apart for transportation, as much as the repeatability of the trim between the front and rear wings.

The main benefit of the system lies in the main screw that maintains the front wing with the rest of the foil. This screw is placed longitudinally and is therefore only stressed in tension instead of shear or bending. The whole foil can be tightened up with everything working in a sound mechanical way.

To gain some precision, robustness and packed-up volume, the screw is combined with a squared, conical assembling system, which has been proven as the best mechanical setup to lock any motion or degree of freedom between the parts, while also contributing greatly to tensional resistance.

PRE PREG TECHNOLOGY

Pre-preg makes the foils stiffer and stronger. With pre-preg fabrics, the carbon fiber is directly impregnated with epoxy resin by its manufacturer. This guarantees a perfect ratio between epoxy and carbon and represents the highest quality process. It is then cured at high temperature, bringing strength and durability.

Quality control is much better and so is the working environment for the people building our foils. Pre-preg fabrics offer the lightest weight with the best mechanical properties of carbon fiber.

CARBON COMPOSITE

The CARBON COMPOSITE construction includes a full layer of carbon laminate on the board’s bottom and deck making it incredibly light and yet surprisingly reliable.