• Μειωμένη τιμή

BERZERKER

540,00 €
405,00 € Έκπτωση 25%
με ΦΠΑ

The Berzerker is designed by one of the world’s smoothest snowboarders, Jake Blauvelt. Jake wanted a board that matched is smooth and effortless style in all terrain conditions. You'll be impressed at how smooth the transition from edge to edge is in any condition. The tip rocker and a small amount of taper in the tail improve edge-to-edge speed and float in powder. The Tapered Quadratic Sidecut has been enhanced to improve stability and edge hold. Carbon Slimerods® 2.0 have carbon for pop and a slime-core to smooth out the landings. The Berzerker is built for an all-mountain rider looking for performance in all conditions. Like a Viking longship, the Berzerker is designed to sail in the shallows or the deep, cut through ice, and take you to snowboard Valhalla. Pay attention to the waist width, the standard sizes run a bit narrow optimized for a smaller boot, the wide sizes are more mid wide providing a good option for the size 11, 12 or 13 boots out there. If you've got a bigger foot or prefer a wider ride, check out the Algorythm.

Size
Ποσότητα
Σε Απόθεμα

FEATURES

SNOWBOARD CATEGORY All Mountain , Powder
SHAPE Directional 
PROFILE Hybrid Camber 
SIDEWALL Roll-in Construction , Slimewalls®
GLASS Hybrid 
CORE + Carbon Slimerods® 2.0 
LAMINATES Carbon Array 3™ , Double Impact Plates
CORE Performance™ 
BASE Sintered , Stone Finish
SIDECUT Quadratic

TECHNOLOGY

DIRECTIONAL HYBRID CAMBER:

A directional shape with a hybrid profile that has more camber than rocker.

directional-hybrid-camber.jpg

QUADRATIC SIDECUT:

Blending of three radii to improve turn initiation/exit while providing the best grip possible. This design is uniquely formulated for each model based on its shape and riding style.

SINTERED BASE:

High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.

PERFORMANCE™ CORE:

High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.

CARBON SLIMERODS®:

RIDE’s Slimerods® give already fun and playful boards the added liveliness to set them apart from other boards. Using strategic placement in the boards tip and/or tail, this technology adds pop without the stiffness generally associated with snappy boards. Made up of flat carbon rods that wrap a urethane slime-core, Slimerods® have carbon for massive pop and a slime-core to smooth out the landing. Available in 2 levels: Slimerods® 1.0 & 2.0.

SLIMEWALLS®:

RIDE’s exclusive Slimewalls® are forgiving and ductile, absorbing impacts rather than defending against them. Just like your skate wheels, the urethane in Slimewalls® smoothes the interaction with the snow, wood or metal surfaces you may ride on. On top of all that, these babies are virtually indestructible, the most durable sidewalls in snowboarding.

IMPACT PLATES LAMINATES:

Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

CARBON ARRAY LAMINATES:

This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.

carbon-array-3.jpg

carbon-array-5.jpg

HYBRID GLASS:

Triaxial on top, biaxial on base; balanced torsional flex and stiffness for better response with speed.

ROLL-IN CONSTRUCTION:

Unique 3D structure built around our urethane Slimewall® sidewalls. Designed to increase overall board strength, prevent topsheet chipping, and reduce weight.


RI.21.BOA.0002

Χαρακτηριστικά

Gender
Men
Year
2021
Profile
Hybrid
Stiffness
6
Riding Style
All Mountain
Powder