FLEXOR III 3/2 CZ MEN

Features

• - QUADRATE Horizontal chest zip entry for maximum flexibility
• - External Liquid seams: 100% water seal
• - Blind stitch:  Glued and blind stitching
• - X-FLEX : 150% stretch main body panels for warmth and freedom of movement
• - X-FLEX THERMAL: core wicks water away from the skin creating a cushion of air between the skin and suit creating ultimate insulation and warmth
• - POWERTEX4: knees four way flex with enhanced durability
• - PK MICRO ZIP: low profile plastic zip fastening

LIQUIDSEAM Panels are glued and blindstitched. The seam is then sealed using a coloured liquid silicon based urethane which reinforces the seam giving each suit a 100% water seal.

BLINDSTITCH Panels are double glued and then butted together followed by stitching that does not penetrate all the way through the neoprene. Inside the wetsuit, heat welded tape goes over the seams in high stress areas, this further strengthens the seams.

X-Flex 150% stretch neoprene is used in our high performance wetsuits. The latest X-FLEX neoprene is 10% lighter, absorbs less water and has a softer, more comfortable feel.

G-TAPE Inner waterproof X-Flex taping fuses seams together for additional reinforcement.

Powertex Four way stretch high specification knee panels designed to resist the most harsh elements while providing maximum flexion and extension of the knee.

X-FLEX THERMAL X-Flex Thermal- combines the performance of X-Flex neoprene with lightweight thermal insulating lining Thermospan.The benefits of combining these technologies create a 10% lighter wetsuit with increase thermal properties.

Mesh Optimum core wind chill protection by absorbing solar heat and reducing evaporative cooling.

REVO FIT Revo Fit has been created using innovative pattern cutting technology producing our finest fitting wetsuits. This 3D fit results in a higher level of comfort and has been improved through intensive team rider testing.

QUADRATE This horizontal bib front entry system contains a micro blackout low profile waterproof chest zip.The Glideskin seals and the concealed bungee cord keeps water out. Eradicating the back zip gives extra stretch to the back of the suit. A snaplock ensures that the zip pull stays in place.

Your wetsuit has been made from carefully selected materials to give the best combination of durability and performance. With the correct care you will gain the maximum life from your suit. Always rinse your suit after use in clean water using a mild detergent if necessary. Pay particular attention to remove any sand or foreign matter from the zips. Please dont use any solvents or other chemicals to remove stains or marks from your wetsuit as this can cause damage. Do not force zips and if possible get someone to pull up the zips for you, pulling zips up not across. Protect your wetsuit from sharp or abrasive objects. Ensure the suit is the correct size and do not pull the ends of sleeves or legs to remove